Cobalt chromium alloy porcelain teeth
Jul 31, 2021
It is a typical non-precious metal porcelain tooth. Porcelain dental is a relatively advanced technique for dental implantation. It has the advantages of beautiful, natural, firm and wear-resistant, and is a favorite product for many dental patients. So what are the components of cobalt-chromium porcelain teeth? Generally, chromium is not less than 25%, molybdenum is not less than 4%, and the total of cobalt, nickel and chromium is not less than 85%. There are different opinions on the quality of cobalt-chromium alloy porcelain teeth. One person believes that nickel-chromium alloy porcelain teeth are widely used at low prices, and more than 50% of patients with porcelain teeth choose this type of porcelain teeth. Good biological fusion, beautiful, economical, durable and other advantages. However, some people have confirmed that this type of porcelain teeth has poor bio-fusion, which can easily cause allergies in some people and cause inflammation of the skin and mucous membranes. The specific use of porcelain teeth should be decided after consultation with the attending doctor in a regular hospital.
The selection and use of non-precious metal alloys are different in the world. The United States uses more nickel-chromium alloys; while in Europe and Japan, cobalt-chromium alloys are basically used for fixed repairs, and nickel content of more than 1% is usually not usable. Compared with cobalt-chromium alloy, nickel-chromium alloy is easier to cast and more economical, but its physical properties and corrosion resistance are not as good as cobalt-chromium alloy. When exposed to a thermal environment, such as in porcelain, the physical properties of nickel-chromium alloys may change, and the alloys become more fragile, making them unsuitable for long bridges. In this regard, cobalt-chromium alloys are far superior to nickel-chromium alloys in heat treatment resistance (Morris 1990, Sing et al. 1999).
Experts believe that the corrosion resistance in the oral cavity: the corrosion performance of alloys without precious metals is fundamentally different from that of precious metal alloys. Because the main components of precious metal alloys are precious metals gold, platinum, palladium and/or silver, these precious metals have a passive oxide layer of spontaneous formation, so they can prevent corrosion to a large extent. This is also reflected in the release of ions. In precious metal alloys, the main secondary components, especially the bonding oxidant and zinc, will dissolve, while the corrosion of the alloys without precious metals is determined by its main component cobalt. According to the German industrial standard DIN EN ISO10271 on corrosion, gold alloys have the lowest ion release, followed by titanium, cobalt-chromium alloys and nickel-chromium alloys.







