We have been pursuing the corporate tenet of 'honesty, truth-seeking, dedicated service, and only seeking satisfaction', and follow customer needs to continuously improve Pre Shaded Zirconia Blocks, pmma milling blocks, vhf milling tools and services. After years of accumulation, we have the strength to independently research and develop products with a group of professional technical talents. Factory direct sales, high quality and low price.

Vsmile Milling Burs Imes-icores ® Compatible

Always Choosing The Best Tools for the Best Results

FOR EACH TYPE OF DENTAL MILLING MACHINE AND MATERIAL SUITABLE TOOL

For each type of machine and every dental material specifically developed and tested milling tools with the best features. The router is the contact point between the dental milling machine and to be milled material and thus crucial. The interface characteristics of the cutter and the cutting speed of the machine must be precisely matched to achieve a high quality result. We have made it our task, with the tools to optimize them for the milling strategies in coordination so that you get the highest level of quality and quantity with your imes icore dental milling machine.

All cutters and grinders are available in 3mm and 6mm shank design.

We have expanded our already very extensive range of tools and offer immediately following dental milling tools:

Imes-icores CAD/CAM Dental Milling Bur

Model: imes icores ® Coritec one, 150i, 250i, 350i, 450i imes icores ® Coritec 350i 450i (do) 650i. Material: Tungsten Steel Coating: CVD Diamond Coating / PVD Diamond Coating / Diamond Liked Coating / Professional Coating forgrinding Packaging: Individually packing

Radius Cutters For Imes Icore

The dental radius cutter has a semicircular rounded tip. It is available with cutting-edge diameters of 0.3 mm to 2.5 mm. While the 2.5 mm tool is mainly used for efficient roughing, tools with a small diameter of 0.3 or 0.6 mm are mainly used for finely finishing or carving out fissures. Due to the especially long free grinding of these tools, undercuts can also be reached easily.

Depending on the application and the sort of dental material, the radius cutters have one to four cutting edges: for PMMA and wax, there are, for instance, extremely sharp single-tooth cutters available with a very low tendency to clog. On the other hand, the 2.5 mm cutters for the abrasive zirconia have three cutting edges and the CoCr cutters even have four in order to reduce the wear for each cutting edge and to ensure greater process reliability.

Grinding Tools For Imes Icore

For processing dental materials such as ceramics and composites, Vsmile offers torus and radius grinding tools with a diamond grit in different grain sizes. The two smaller torus grinding tools with their fine grain size are mainly used for drillings and abutments. The 2.5 mm grinding tools with their coarser grain size are used for roughing and the fine-grained radius grinding tools for the finishing process.

All milling tools are characterized by their good abrasion and break resistance and extremely long endurance. The diamond grit with its especially good binding to the shank avoids micro-cracks and reduces the sensitivity to thermal impact.

We follow the international cutting-edge technology and look ahead to the Full Denture PMMA Block CAD Cam Milling Blank industry development trend. Pay attention to customer feedback, timely grasp the market dynamics, to provide new and old customers with more quality products and services, we look forward to sincere cooperation with you, common development, create brilliant. The company has always been operating with integrity, courteous service, and genuine products at a reasonable price. After years of hard work, it has been recognized by customers, and it has established a good image among its peers and won the reputation of customers.